Quick Fix - Quick Test

– 3 oz of synthetic urine

– a heating pad

– a plastic temperature strip

– easy to follow instructions

Our main goal is to make sure that you are completely satisfied with our Quick Fix Synthetic Urine 6.3 Plus kit, so we’ve made the directions as foolproof as possible. After you buy it, just follow these 5 easy steps:

1- Take the top off the container.

2. Heat it up for up to 10 seconds to get the sample within a temperature range of 94-100°F.

3. Close the cap and shake the bottle gently.

4. Test the temperature with the strip.

5. Attach your synthetic urine bottle to the heating pad.

If the temperature remains out of range after first heating, then repeat the procedure and check again. If the temperature is not in range after the first two attempts, make sure the container has not been heated above 100°F.

You can only use Spectrum Labs Quick Fix plus once, but it can be reheated or cooled as many times as needed over the shelf life of the product.

No refrigerating, freezing or thawing needed.

Two Methods of Preparation 

When preparing your Quick Fix Synthetic Urine you have two options for preparation:

Option 1.

The quick preparation method. After you buy it, microwave the pre-mixed solution for about 10 seconds or until the temperature strip reads between 90-99°F. If the temperature falls below the safe zone of 90-99°F, don’t panic. From here you can shake the heating pad provided and attach it to the bottle in order to bring the urine back to the correct temperature. You can also keep the bottle close to a warm part of your body in order to retain heat. For males, keeping it close to the underwear will work to a tee.

For females, the bra or underwear is suggested. We recommend that you never keep the fake piss in your pocket. Please note your urine sample should be at a temperature between 90-99°F.

Option 2.

The slow preparation method. This method is usually used by people who have no idea when their urine screening will be. Remove the Quick Fix urine bottle from the box and apply the heating pad to the back of the bottle as advised above, on the opposite side of the temperature strip, using the rubber band provided. Store the fake pee in your pants or leg using our synthetic urine belt; any type of body heat will help assist the warming process. If you cannot store it on you, the fake urine will take approximately 45 minutes to reach the desired temperature of 92-99°F. When taking the screen cup to the bathroom, follow the same directions as above and do not forget to give the bottle a quick shake to ensure you give the Quick Fix urine some bubbles.